DTC U0452-68: Error Signal Received From SAS Control Module

U0452:68 (DASH_ESU) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from SAS control module
Detection condition	The dash-electrical supply unit receives the error signal from the SAS control module.
Fail-safe	Control at the default signal value.
Possible cause	DTCs are stored in the SAS control module. (See DTC TABLE [SAS] .) SAS control module malfunction (Refer to [SAS CONTROL MODULE REMOVAL/INSTALLATION ] ). Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION ] ).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable