DTC U0422-68: Error Signal Received From Body Control Module (BCM)

U0422:68 (DASH_ESU) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from body control module (BCM)
Detection condition	The dash-electrical supply unit receives the error signal from the body control module (BCM).
Fail-safe	Control at the default signal value.
Possible cause	DTCs are stored in the body control module (BCM). (See DTC TABLE [BCM] .) Body control module (BCM) malfunction (Refer to [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION ] ). Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION ] ).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable