DTC U0415-68: Error Signal Received From Electronically Controlled Brake Unit/DSC HU/Cm
U0415:68 (DASH_ESU) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from electronically controlled brake unit/DSC HU/CM |
| Detection condition |
- The dash-electrical supply unit receives the error signal from the electronically controlled brake unit/DSC HU/CM.
|
| Fail-safe |
- Control at the default signal value.
|
| Possible cause |
- DTCs are stored in the electronically controlled brake unit/DSC HU/CM. (See DTC TABLE [DSC]
.)
- Electronically controlled brake unit/DSC HU/CM malfunction (Refer to [ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION
]
). (Refer to [
DSC HU/CM REMOVAL/INSTALLATION]
).
- Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION
]
).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
|
| System wiring diagram |
|