DTC B1528-86: Error Signal Received From PTC Heater
B1528:86 (DASH_ESU) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from PTC heater |
| Detection condition |
- The dash-electrical supply unit receives an error signal from the PTC heater.
|
| Fail-safe |
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between PTC heater and dash-electrical supply unit (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- PTC heater malfunction (Refer to [
POSITIVE TEMPERATURE COEFFICIENT (PTC) HEATER INSPECTION]
).
- Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION
]
).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
|
 Courtesy of MAZDA MOTORS CORP.
|
| 1 |
Dash-electrical supply unit |
| 2 |
PTC heater |