PID/Data Monitor Table

PID/DATA MONITOR (IC)

PID	Unit/Operation	Data contents
ALH_HBC_SW	Off/On	Off: Adaptive LED headlight/high beam control system (HBC) switch is off. On: Adaptive LED headlight/high beam control system (HBC) switch is on.
ALH_HBC_SW_HIST	Off/On	Off: After connecting power supply, adaptive LED headlight/high beam control system (HBC) switch never turned on. On: After connecting power supply, adaptive LED headlight/high beam control system (HBC) switch turned on at least once.
ASC_SW	Off/On	Off: Cruise control switch or SET - switch is off. On: Cruise control switch or SET - switch on.
ASC_SW_HIST	Off/On	Off: After connecting power supply, cruise control switch never turned on. On: After connecting power supply, cruise control switch turned on at least once.
CANCEL_SW	Off/On	Off: CANCEL switch or cruising & traffic support (CTS) switch is off. On: CANCEL switch or cruising & traffic support (CTS) switch is on.
CANCEL_SW_HIST	Off/On	Off: After connecting power supply, CANCEL switch never turned on. On: After connecting power supply, CANCEL switch turned on at least once.
DAS_OFF_SW_HIST	Off/On	Off: After connecting power supply, i-ACTIVSENSE OFF switch never turned on. On: After connecting power supply, i-ACTIVSENSE OFF switch turned on at least once.
DAS_SW	Off/On	Off: i-ACTIVSENSE OFF switch is off. On: i-ACTIVSENSE OFF switch is on.
DIM_CANCEL	Off/On	Off: Dimmer cancel signal is not received. On: Dimmer cancel signal is received.
DIST_MINUS_SW	Off/On	Off: DISTANCE switch is not pressed in minus direction. On: DISTANCE switch is pressed in minus direction.
DIST_MINUS_SW_HIST	Off/On	Off: After connecting power supply, DISTANCE switch never pressed in minus direction. On: After connecting power supply, DISTANCE switch pressed in minus direction at least once.
DIST_PLUS_SW	Off/On	Off: DISTANCE switch is not pressed in plus direction. On: DISTANCE switch is pressed in plus direction.
DIST_PLUS_SW_HIST	Off/On	Off: After connecting power supply, DISTANCE switch never pressed in plus direction. On: After connecting power supply, DISTANCE switch pressed in plus direction at least once.
DPOS_D1_SW	Off/On	Off: Memory switch 1 is off. On: Memory switch 1 is on.
DPOS_D1_SW_HIST	Off/On	Off: After connecting power supply, memory switch 1 never turned on. On: After connecting power supply, memory switch 1 turned on at least once.
DPOS_D2_SW	Off/On	Off: Memory switch 2 is off. On: Memory switch 2 is on.
DPOS_D2_SW_HIST	Off/On	Off: After connecting power supply, memory switch 2 never turned on. On: After connecting power supply, memory switch 2 turned on at least once.
DPOS_SET_SW	Off/On	Off: SET switch is off. On: SET switch is on.
DPOS_SET_SW_HIST	Off/On	Off: After connecting power supply, SET switch never turned on. On: After connecting power supply, SET switch turned on at least once.
DSC_SW	Off/On	Off: TCS OFF switch is off. On: TCS OFF switch is on.
DSC_SW_HIST	Off/On	Off: After connecting power supply, TCS OFF switch never turned on. On: After connecting power supply, TCS OFF switch turned on at least once.
FUEL_GAUGE	%	Fuel gauge is displayed. NOTE: 0% indicated for 0 liters, 100% for 100 liters
INFO_SW	Off/On	Off: INFO button is not pressed. On: INFO button is pressed.
I-STOP_OFF_SW	Off/On	Off: i-stop OFF switch is off. On: i-stop OFF switch is on.
I-STOP_OFF_SW_HIST	Off/On	Off: After connecting power supply, i-stop OFF switch never turned on. On: After connecting power supply, i-stop OFF switch turned on at least once.
LIM_SW	Off/On	Off: MODE switch is off. On: MODE switch is on.
LIM_SW_HIST	Off/On	Off: After connecting power supply, MODE switch never turned on. On: After connecting power supply, MODE switch turned on at least once.
MRCC_SW	Off/On	Off: Mazda radar cruise control (MRCC) switch or RES switch is off. On: Mazda radar cruise control (MRCC) switch or RES switch is on.
MRCC_SW_HIST	Off/On	Off: After connecting power supply, Mazda radar cruise control (MRCC) switch never turned on. On: After connecting power supply, Mazda radar cruise control (MRCC) switch turned on at least once.
MULTI_SW_STAT_A	Normal/Failure	Normal: Cluster switch is normal. Failure: Cluster switch has a malfunction.
MULTI_SW_STAT_B	Normal/Failure	Normal: Position memory switch is normal. Failure: Position memory switch has a malfunction.
PNL_CTRL_SW	Off/Plus_Switch depressed/Minus_Switch depressed/Both_Switch depressed	Off: Both switch are not depressed. Plus_Switch depressed: Panel light control+ switch is depressed. Minus_Switch depressed: Panel light control- switch is depressed. Both_Switch depressed: Both switch are depressed.
PNL_LGHT_CTRL_SW	%	Displays brightness to turn on panel lights
PSM_OFF_SW	Off/On	Off: Parking sensor OFF switch is off. On: Parking sensor OFF switch is on.
PSM_OFF_SW_HIST	Off/On	Off: After connecting power supply, parking sensor OFF switch never turned on. On: After connecting power supply, parking sensor OFF switch turned on at least once.
R_FOG_SW	Off/On	Off: Rear fog light switch is off. On: Rear fog light switch is on.
R_FOG_SW_HIST	Off/On	Off: After connecting B+ power supply, rear fog light switch never not turned on. On: After connecting B+ power supply, rear fog light switch turned on at least once.
RESUME_SW	Off/On	Off: RES switch or Mazda radar cruise control (MRCC) switch is off. On: RES switch or Mazda radar cruise control (MRCC) switch is on.
RESUME_SW_HIST	Off/On	Off: After connecting power supply, RES switch never turned on. On: After connecting power supply, RES switch turned on at least once.
REV_LAMP_STAT	Off/On	Off: Back-up light on signal is not sent from instrument cluster. On: Back-up light on signal is sent from instrument cluster.
SET_MINUS_SW	Off/On	Off: SET - switch or cruise control switch is off. On: SET - switch or cruise control switch is on.
SET_MINUS_SW_HIST	Off/On	Off: After connecting power supply, SET - switch never turned on. On: After connecting power supply, SET - switch turned on at least once.
SET_PLUS_SW_HIST	Off/On	Off: After connecting power supply, SET + switch never turned on. On: After connecting power supply, SET + switch turned on at least once.
SHIFT_DOWN_SW	Off/On/Unknown	Off: Down switch is not operated (pulled). On: Down switch is operated (pulled). Unknown: Steering shift switch operation is not determined.
SHIFT_LEVER_POS	between 2 positions/P/R/N/D/S (2)/L (1)	between 2 positions: Selector lever is between two positions. P: Selector lever is in P position. R: Selector lever is in R position. N: Selector lever is in N position. D: Selector lever is in D position. S (2): Selector lever is in D position 2nd gear. L (1): Selector lever is in D position 1st gear.
SHIFT_UP_SW	Off/On/Unknown	Off: Up switch is not operated. On: Up switch is operated. Unknown: Steering shift switch operation is not determined.
SPD_MTR	%	Displays the vehicle speed. NOTE: 0% indicated for 0 km/h, 100% for 300 km/h
STR_SW	Off/On	Off: Steering switch is off. On: Steering switch is on.
TACHOMTR	%	Displays the engine speed. NOTE: 0% indicated for 0 rpm, 100% for 10000 rpm
TJA_SW	Off/On	Off: Cruising & traffic support (CTS) switch or CANCEL switch is off. On: Cruising & traffic support (CTS) switch or CANCEL switch is on.
TJA_SW_HIST	Off/On	Off: After connecting power supply, Cruising & traffic support (CTS) switch never turned on. On: After connecting power supply, Cruising & traffic support (CTS) switch turned on at least once.
TLO_PLG_SW	Off/On	Off: Power liftgate (PLG) front switch/trunk lid opener switch is off. On: Power liftgate (PLG) front switch/trunk lid opener switch is on.
TLO_PLG_SW_HIST	Off/On	Off: After connecting power supply, Power liftgate (PLG) front switch/trunk lid opener switch never turned on. On: After connecting power supply, Power liftgate (PLG) front switch/trunk lid opener switch turned on at least once
TNS_LAMP_STAT	Off (Daylight mode)/On (Night mode)	Off (Daylight mode): Lights-on indicator light is turned off. On (Night mode): Lights-on indicator light is turned on.
TRIP_SW	Off/On	Off: Tripmeter switch is off. On: Tripmeter switch is on.
TVM_OFF_SW	Off/On	Off: 360°view monitor switch is off. On: 360°view monitor switch is on.
TVM_OFF_SW_HIST	Off/On	Off: After connecting power supply, 360°view monitor switch never turned on. On: After connecting power supply, 360°view monitor switch turned on at least once.
VPWR	V	Displays the power supply voltage.