LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front Under Cover Removal/Installation >> Remove Front Under Cover No. 2

Remove Front Under Cover No. 2

  1. Remove using the procedure shown in the figure.
    Fig 1: Front Under Cover No. 2, Fasteners And Bolts With Torque Specification
    G16691824Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Bolt 11 N.m {110 kgf.cm, 95 in.lbf}
2 Fastener -
3 Front under cover No. 2 -
scientia non olet · About LEMON Manuals