Remove Center Lower Panel: Notes
- Remove using the procedure shown in the figure.
TIGHTENING TORQUE SPECIFICATION
| Step | Part name | |
|---|---|---|
| 1 | Screw | 2.5 N.m {23 kgf.cm, 20 in.lbf} |
| 2 | Center lower panel (See Center lower panel removal note ). |
- |
| Step | Part name | |
|---|---|---|
| 1 | Screw | 2.5 N.m {23 kgf.cm, 20 in.lbf} |
| 2 | Center lower panel (See Center lower panel removal note ). |
- |