Inspect Notification And Warning Speaker

NOTE:

Perform the procedure with the notification and warning speaker removed. (See NOTIFICATION AND WARNING SPEAKER (FRONT) REMOVAL/INSTALLATION ) (See NOTIFICATION AND WARNING SPEAKER (REAR) REMOVAL/INSTALLATION )

Verify the resistance between the notification and warning speaker terminals A-B.
Notification and warning speaker resistance

3.4-4.6 Ω

Courtesy of MAZDA MOTORS CORP.
- If not within the standard, replace the notification and warning speaker. (See NOTIFICATION AND WARNING SPEAKER (FRONT) REMOVAL/INSTALLATION ) (See NOTIFICATION AND WARNING SPEAKER (REAR) REMOVAL/INSTALLATION )