DTC P18A5-00: Pcm Configuration

WARNING: This page is about a different variant/trim than selected.

P18A5-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM configuration
Detection condition	The PCM detects configuration data not record.
Fail-safe	Inhibits the i-ACTIV AWD control.
Possible cause	The coupling component value is not input to the PCM correctly. (See COUPLING COMPONENT CALIBRATION DATA WRITING .) PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y) in the service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .) Switch the ignition ON (engine off). Perform the DTC inspection for the PCM. (See DTC INSPECTION .)
System wiring diagram	Not applicable