DTC P16C0-00: Pcm Processor Error

WARNING: This page is about a different variant/trim than selected.

P16C0-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM processor error
Detection condition	The PCM detects a processing error in the signal input to the PCM from the CKP sensor.
Fail-safe	Not applicable
Possible cause	PCM connector or terminals malfunction (see CONNECTOR INSPECTION .) PCM malfunction (PCM internal CPU malfunction) (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y) in the service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System wiring diagram	Not applicable