LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (On-Board Diagnostic - Engine Control (VIN Y) (5 Of 6)) >> DTC P1200-00: Fuel Injection Quantity System: Low Fuel Injection Amount >> Function Inspection Using M-MDS

Function Inspection Using M-MDS

WARNING: This page is about a different variant/trim than selected.
P1200-00: (PCM - VIN Y) FUNCTION INSPECTION USING M-MDS

Step Inspection Results Action
1 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
    NOTE:
    • Recording can be facilitated using the screen capture function of the PC.
 - Go to the next step.
2 PURPOSE: INSPECT FOR OTHER RELATED DTCs 
  • Perform the DTC inspection for the PCM.

    (See DTC INSPECTION .)

  • Are any of the following DTCs displayed?
    • P0171:00
 Yes Repair the malfunctioning location according to the applicable DTC troubleshooting.
(See P0171:00 .)
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
scientia non olet · About LEMON Manuals