DTC P0328-00: KS System: High Input
WARNING: This page is about a different variant/trim than selected.
P0328-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
KS system: High input |
| Detection condition |
- The specified period of time has elapsed while the knock sensor voltage is high.
|
| Fail-safe |
- Sets the knocking spark retard correction value of the ignition control to the fixed value.
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between KS and PCM (see CIRCUIT INSPECTION
.) (see CLEARING DTC
.)
- KS malfunction (Refer to KNOCK SENSOR (KS) INSPECTION (VIN Y)
in the service information.)
- PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y)
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
- Perform the KOEO or KOER self test. (See DTC INSPECTION
.)
|
 Courtesy of MAZDA MOTORS CORP.
|
| 1 |
PCM |
| 2 |
KS |