LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (On-Board Diagnostic - Engine Control (VIN Y) (3 Of 6)) >> DTC P0300-00: Random Misfire >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Drive the vehicle at a speed of 40 km/h {25 mph} or more.
  2. Shift to 3rd gear and rapidly accelerate the vehicle to 60 km/h {37 mph} (to execute misfire monitor).
  3. Release the accelerator pedal and decelerate the vehicle to 40 km/h {25 mph}.
  4. Repeat Step  1 to  3 operations 5 times.
    NOTE:
    • Match the engine coolant temperature in the recorded freeze frame data/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  5. Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the freeze frame data/snapshot data.
scientia non olet · About LEMON Manuals