Function Inspection Using M-MDS

WARNING: This page is about a different variant/trim than selected.

P0137-00: (PCM - VIN Y) FUNCTION INSPECTION USING M-MDS

Step	Inspection	Results	Action
1	PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION Record the freeze frame data/snapshot data and diagnostic monitoring test results (A/F sensor heater, HO2S heater related). NOTE: Recording can be facilitated using the screen capture function of the PC.	-	Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.