DTC P061D-00: Pcm Processor Error

WARNING: This page is about a different variant/trim than selected.

P061D-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM processor error
Detection condition	PCM internal malfunction
Fail-safe	Restricts the upper limit of the engine speed.
Possible cause	DTCs are stored in the PCM. (other than P061D-00:) (See DTC TABLE .) PCM connector or terminal malfunction (see CONNECTOR INSPECTION .) PCM calibration malfunction NOTE: Program the PCM to the latest calibration. PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y) in the service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System wiring diagram	Not applicable