DTC P0610-00: Pcm Vehicle Configuration Error

WARNING: This page is about a different variant/trim than selected.

P0610-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM vehicle configuration error
Detection condition	PCM data configuration error.
Fail-safe	Not applicable
Possible cause	PCM configuration has not been completed. (see CONFIGURATION .) PCM connector or terminals malfunction (see CONNECTOR INSPECTION .) PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y) in the service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System wiring diagram	Not applicable