LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (On-Board Diagnostic - Engine Control (VIN Y) (4 Of 6)) >> DTC P0606-00: Pcm Processor Error

DTC P0606-00: Pcm Processor Error

WARNING: This page is about a different variant/trim than selected.
P0606-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location PCM processor error
Detection condition
  • PCM internal CPU malfunction.
Fail-safe
  • Fixes the throttle valve opening angle.
Possible cause
  1. PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y) in the service information.)
Repeatability verification procedure
  1. Clear the DTC recorded in the memory. (see CLEARING DTC .)
  2. Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System wiring diagram
  • Not applicable