Details On DTCs

WARNING: This page is about a different variant/trim than selected.

P058A-00: (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Current sensor system: Function malfunction
Detection condition	Determination conditions	The PCM receives a malfunction signal from the current sensor.
	Preconditions	Not applicable
	Malfunction determination period	5 s period
	Drive cycle	2
	Self test type	CMDTC self test
	Sensor used	Current sensor
Fail-safe	Not applicable
Vehicle status when DTCs are output	The engine cannot be started or the engine may stall due to battery voltage decrease.
Possible cause	Current sensor related DTCs are stored in PCM. Malfunction in wiring harness (including connector/terminal) between battery and current sensor Malfunction in wiring harness (including connector/terminal) between current sensor and PCM Current sensor malfunction PCM malfunction