Details on DTCs

WARNING: This page is about a different variant/trim than selected.

U0322:00 (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Body control module (BCM) malfunction
Detection condition	Determination condition	When any of the following conditions is met. CAN communication line malfunction between body control module (BCM) and PCM Body control module (BCM) internal malfunction
	Preconditions	The following conditions continue for 1.5 s: Battery voltage: above 9.45 V* Switch the ignition ON (engine off or on) *: Standard can be verified by displaying PIDs using M-MDS
	Determination period	2 s period
	Drive cycle	1
	Self-test type	CMDTC self test, KOEO self test, KOER self test
	Sensor/unit used	PCM
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	DTCs are stored in the following modules. (CAN driver malfunction) Body control module (BCM) PCM (other than U0322:00) Malfunction in CAN communication line (including connector/terminal) between body control module (BCM) and PCM Body control module (BCM) malfunction PCM malfunction