DTC U0151-00: Can Communication: Communication Error To SAS Control Module
WARNING: This page is about a different variant/trim than selected.
U0151:00 (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
CAN communication: Communication error to SAS control module |
| Detection condition |
- A communication error between the PCM and SAS control module continues for the specified period of time.
|
| Fail-safe |
|
| Possible cause |
- Malfunction in CAN communication line between SAS control module and PCM
- SAS control module malfunction (Refer to applicable SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.]
in the service information.)
- PCM malfunction (Refer to applicable PCM REMOVAL/INSTALLATION (VIN Y)
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
- Perform the KOEO or KOER self test. (See DTC INSPECTION
.)
|
| System wiring diagram |
|