Intention of troubleshooting procedure
WARNING: This page is about a different variant/trim than selected.
- Step 1
- Perform a unit inspection of the battery.
- Step 2-3
- Verify if fuel in the fuel tank is dirty.
- Step 4
- Perform a unit inspection of the fuel gauge sender unit.
- Step 5-6
- Inspect the hose between the fuel tank (main) and the fuel tank (sub).
- Step 7
- Perform a unit inspection of the fuel pump unit.
- Repair completion verification
- Verify that the primary malfunction is resolved and there are no other malfunctions.