Details On DTCs

WARNING: This page is about a different variant/trim than selected.

P2251:00 (PCM - VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	A/F sensor system: Open circuit in A/F sensor signal circuit
Detection condition	Determination conditions	The following conditions are met: A/F sensor element impedance is specified value or more The voltage (Vs+ terminal) of the A/F sensor signal circuit is less than the standard, or unstable.
	Preconditions	Battery voltage: 11-18 V^1 A/F sensor is activated. The following DTCs are not detected: A/F sensor terminal F voltage (Vs+ terminal) is less than the standard: A/F sensor heater: P0031:00 and P0032:00 A/F sensor terminal F voltage (B+ terminal) is unstable: Internal PCM malfunction: P064D:00 ^1 : Standard can be verified by displaying PIDs using M-MDS
	Malfunction determination period	Not applicable
	Drive cycle	2
	Self test type	CMDTC self test, KOER self test
	Sensor used	A/F sensor
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	Malfunction in wiring harness (including connector/terminal) between A/F sensor and PCM A/F sensor malfunction PCM malfunction