Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
SULFURIC SMELL OCCURS (VIN Y) DIAGNOSTIC PROCEDURE
| Step |
Inspection |
Results |
Action |
| 1 |
VERIFY PCM DTCs
- Perform the DTC inspection for the PCM. (See DTC INSPECTION
.)
- Are any DTCs displayed?
|
Yes |
Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [PCM (VIN Y)]
.) |
| No |
Go to the next step. |
| 2 |
VERIFY FUEL USED
- Verify with the customer if the fuel brand used was changed before the occurrence of sulfuric smell.
- Was the fuel brand used changed?
|
Yes |
The vehicle is normal. Explain the following to the customer.
- Sulfuric smell occurred due to high sulfur content in the fuel
- Occurrence of sulfuric smell does not affect the driving performance or durability of the vehicle Complete the symptom troubleshooting.
|
| No |
The vehicle is normal. Explain the following to the customer.
- The vehicle is normal
- The mechanism of sulfuric smell occurrence
- Occurrence of sulfuric smell does not affect the driving performance or durability of the vehicle Complete the symptom troubleshooting.
|