LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Exhaust System (VIN Y)) >> Exhaust System Removal/Installation (VIN Y) >> Exhaust System Removal/Installation >> WU-TWC insulator No. 1 installation note

WU-TWC insulator No. 1 installation note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily tighten the WU-TWC insulator No. 1 installation bolts.
    Fig 1: WU-TWC Insulator No. 1 Installation Bolts Tightening Sequence
    G16372336Courtesy of MAZDA MOTORS CORP.
  2. Tighten the bolts in the order shown in the figure.
scientia non olet · About LEMON Manuals