LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Exhaust System (VIN Y)) >> Exhaust System Removal/Installation (VIN Y) >> Exhaust System Insulator Removal/Installation >> Insulator (rear) installation note

Insulator (rear) installation note

WARNING: This page is about a different variant/trim than selected.
  1. Align the stud bolts shown in the figure with the insulator (rear) and install.
    G16372340Courtesy of MAZDA MOTORS CORP.
  2. Tighten the nuts to the specified torque.
scientia non olet · About LEMON Manuals