LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Exhaust System (VIN Y)) >> Exhaust System Removal/Installation (VIN Y) >> Brace Bar Installation Note

Brace Bar Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Tighten bolt A shown in the figure to the specified torque.
    G16372342Courtesy of MAZDA MOTORS CORP.
  2. Tighten bolt B shown in the figure to the specified torque.
  3. Tighten the remaining bolts to the specified torque.
scientia non olet · About LEMON Manuals