LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Emission System (VIN Y)) >> EGR Cooler Removal/Installation (VIN Y) >> EGR Cooler Installation Bolt Installation Note

EGR Cooler Installation Bolt Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily tighten the bolts shown in the figure.
    Fig 1: EGR Cooler Bolts Tightening Sequence
    G16372512Courtesy of MAZDA MOTORS CORP.
  2. Tighten the bolts in the order shown in the figure.
scientia non olet · About LEMON Manuals