LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Emission System (VIN Y)) >> Check Valve (Emission System) Removal/Installation (VIN Y) >> Intake Manifold Side >> Notes

Intake Manifold Side: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION (VIN Y) .)
  2. Remove in the order indicated in the table.
    G16372501Courtesy of MAZDA MOTORS CORP.
    CHECK VALVE (EMISSION SYSTEM) COMPONENT OPERATIONS

    Component No. Refer to
    1 Cover
    2 Vacuum hose
    3 Check valve (intake manifold side)
    (See CHECK VALVE (INTAKE MANIFOLD SIDE) INSTALLATION NOTE .)
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals