LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Lubrication (VIN Y)) >> Oil Pump Removal/Installation (VIN Y) >> Oil Pump Driven Sprocket Installation Note

Oil Pump Driven Sprocket Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the marks on each sprocket and the oil pump chain.
    G16371745Courtesy of MAZDA MOTORS CORP.
  2. While pressing the oil pump chain in the direction of the arrow shown in the figure, install the oil pump driven sprocket.
    G16371746Courtesy of MAZDA MOTORS CORP.
  3. While locking the oil pump against rotation as shown in the figure, tighten the oil pump driven sprocket installation bolt.
G16371747Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals