Resistance Inspection
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Disconnect the air bypass valve connector. (See DYNAMIC PRESSURE TURBO REMOVAL/INSTALLATION (VIN Y) .)
- Inspect the resistance between air bypass valve terminals A and B.
Air bypass valve resistance
12.7-13.7 ohms [23°C {73°F}]
- If not within the specification, replace the dynamic pressure turbo. (See DYNAMIC PRESSURE TURBO REMOVAL/INSTALLATION (VIN Y) .)