LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Intake-Air System And Turbocharger (VIN Y)) >> Accelerator Pedal Removal/Installation (VIN Y)

Accelerator Pedal Removal/Installation (VIN Y)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove in the order indicated in the table.
    Fig 1: Accelerator Pedal Components Location With Torque Specification
    G16371933Courtesy of MAZDA MOTORS CORP.
    ACCELERATOR PEDAL COMPONENT OPERATIONS

    Component No. Refer to
    1 APP sensor connector
    2 Accelerator pedal
  3. Install in the reverse order of removal.