LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical System (VIN Y)) >> Front Oil Seal Replacement (VIN Y) >> Front Oil Seal Removal Note

Front Oil Seal Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Cut the oil seal lip using a utility knife.
  2. Remove the oil seal using a flathead screwdriver with the tip protected by a clean cloth to prevent damage to the oil seal sliding part of the crankshaft.
    G16379632Courtesy of MAZDA MOTORS CORP.