Generator Drive Belt
WARNING: This page is about a different variant/trim than selected.
NOTE:
- The generator drive belt deflection/tension inspection is not necessary with the adoption of the drive belt auto tensioner.
- The generator drive belt does not have to be replaced because fraying of the generator drive belt does not affect the performance.
- Visually inspect or feel that there is no wear, damage, or cracking on the inside and sides of the entire belt.
- Even if there is a little wear, damage, or cracking, replace the generator drive belt. (See DRIVE BELT REMOVAL/INSTALLATION (VIN Y) .)
- Verify that the indicator part of the cast hexagon on the drive belt auto tensioner is within the normal range.
- If it exceeds the limit, replace the generator drive belt. (See DRIVE BELT REMOVAL/INSTALLATION (VIN Y) .)