High Pressure Fuel Pipe Installation Note
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Damage or deformation to the end of the high pressure fuel pipe may cause fuel leakage. When installing the high pressure fuel pipe to the high pressure fuel pump, be very careful while handling the end of the high pressure fuel pipe.
- If parts are exposed to fuel, their function may be decreased or a fire may occur. Always wipe off any leaked fuel using a clean rag.
- Do not let foreign materials enter into the high pressure fuel pipe.
- Install a new high pressure fuel pipe because it cannot be reused.
- Temporarily tighten the nuts on both ends.
- Temporarily tighten the high pressure fuel pipe bracket installation bolt.
- Tighten the nuts on both ends.
- Tighten the high pressure fuel pipe bracket installation bolt.