LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel System (VIN Y)) >> Fuel-Filler Pipe Removal/Installation (VIN Y) >> Fuel-filler Pipe Installation Note

Fuel-filler Pipe Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily install the fuel-filler pipe to the vehicle-side stud bolt.
    Fig 1: Fuel-Filler Pipe To Vehicle-Side Stud Bolt And Nut With Torque Specification
    G16372227Courtesy of MAZDA MOTORS CORP.
  2. Temporarily tighten bolt.
  3. Completely tighten the nut.
  4. Completely tighten bolt.
scientia non olet · About LEMON Manuals