LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel System (VIN Y)) >> Fuel Tank Removal/Installation (VIN Y) >> Breather Hose Installation Note

Breather Hose Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the breather hose marking with the projection on the pipe as shown in the figure and assemble.

    Fuel tank side 

    G16372221Courtesy of MAZDA MOTORS CORP.
  2. Align the breather hose marking with the fuel-filler pipe marking as shown in the figure and assemble.

Fuel-filler pipe side 

G16372222Courtesy of MAZDA MOTORS CORP.