LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel System (VIN Y)) >> Fuel Injector Removal/Installation (VIN Y) >> Teflon Seal Removal Note

Teflon Seal Removal Note

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • When stretching the teflon seal, do not damage the fuel injector with the tool.
  1. Stretch the teflon seal as shown in the figure.
    G16372177Courtesy of MAZDA MOTORS CORP.
  2. Remove the teflon seal as shown in the figure.
G16372178Courtesy of MAZDA MOTORS CORP.