LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System (VIN Y)) >> Thermostat Removal/Installation (VIN Y) >> Thermostat Installation Note

Thermostat Installation Note

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not apply oil (such as engine oil, ATF) to the rubber seal part of the thermostat. Otherwise, the O-ring could swell causing a seal malfunction.
  1. Install the thermostat with the jiggle pin aligned with the notch of the water outlet.
G16371852Courtesy of MAZDA MOTORS CORP.