LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Fuel Gauge Sender Unit Removal/Installation >> Fuel Gauge Sender Unit (Sub) >> Set plate component installation note

Set plate component installation note

  1. Align the reinforcement part of the set plate component near the pipe area of the fuel pump unit as shown in the figure and assemble.
G16377382Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals