LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Upper Face Removal/Installation

Upper Face Removal/Installation

  1. Detach the hood latch protector tabs from the hood latch and remove the hood latch protector.
    G16376784Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolts and screws.
    Fig 1: Upper Face, Bolts And Screws With Torque Specification
    G16376785Courtesy of MAZDA MOTORS CORP.
  3. Remove the fasteners A and B.
    G16376786Courtesy of MAZDA MOTORS CORP.
  4. To prevent scratches or damage, apply protective tape to the positions shown in the figure.
    G16376787Courtesy of MAZDA MOTORS CORP.
  5. Detach the upper face from the front bumper slider No. 2.
    G16376788Courtesy of MAZDA MOTORS CORP.
  6. Move the upper fascia in the direction of arrow (1) shown in the figure and detach the clips from the front bumper.
    G16376789Courtesy of MAZDA MOTORS CORP.
  7. Remove the upper fascia in the direction of arrow (2) shown in the figure.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals