LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Splash Shield Removal/Installation >> Rear Splash Shield

Rear Splash Shield

  1. Remove the rear over fender (See REAR OVER FENDER REMOVAL/INSTALLATION .)
  2. Remove the screws, fasteners and cap nut.
    G16376780Courtesy of MAZDA MOTORS CORP.
  3. Detach the hooks.
  4. Remove the rear splash shield while detaching the pin.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals