LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Cowl Grille Removal/Installation

Cowl Grille Removal/Installation

  1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
  2. Disconnect the joint pipe A of the windshield washer hose. (See WINDSHIELD WASHER HOSE REMOVAL/INSTALLATION .)
  3. Remove the clips.
    G16376670Courtesy of MAZDA MOTORS CORP.
  4. Remove clips A and B. (when removing the weatherstrip)
    G16376671Courtesy of MAZDA MOTORS CORP.
  5. Remove the weatherstrip. (when removing the weatherstrip)
  6. Remove the fasteners.
    G16376672Courtesy of MAZDA MOTORS CORP.
  7. Detach the pins.
  8. Pull the cowl grille in the direction of the arrow in the order of (1), (2), (3), (4), (5) and remove it while detaching the tabs.
    G16376673Courtesy of MAZDA MOTORS CORP.
  9. When removing the side cowl grille, perform the following procedure:
    1. Remove the windshield wiper de-icer wiring harness from the hooks. (with windshield wiper de-icer)
      G16376674Courtesy of MAZDA MOTORS CORP.
    2. Pull the tabs A and B in the direction of the arrow shown in the figure and detach the tabs A and B from the dashboard upper panel.
      G16376675Courtesy of MAZDA MOTORS CORP.
    3. Remove the side cowl grille in the direction of the arrow shown in the figure while detaching the clip from the dashboard upper panel.
      G16376676Courtesy of MAZDA MOTORS CORP.
    4. Pull the side cowl grille in the direction of the arrow shown in the figure while pulling out the pin.
    G16376677Courtesy of MAZDA MOTORS CORP.
  10. Remove the side cowl grille.
  11. Install the removed clip to the side cowl grille.
  12. Install in the reverse order of removal.