Upper Face Removal/Installation

Remove the hood latch protector while detaching the tabs.

Courtesy of MAZDA MOTORS CORP.
Remove the screws and bolts.

Fig 1: Upper Face Screws And Bolts With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Remove the fasteners A and B.

Courtesy of MAZDA MOTORS CORP.
Detach the upper face from the front bumper slider No. 2.

Courtesy of MAZDA MOTORS CORP.
Remove the upper face in the direction of the arrows shown in the figure below while pulling out the locator pins.

Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.