LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> 3 Premium >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Light Switch Removal/Installation

Light Switch Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] .) (See DRIVER-SIDE AIR BAG MODULE INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] .)
  3. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  4. Remove the lower column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  5. Remove the clock spring. (See CLOCK SPRING REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] .)
  6. Remove the Wiper and washer switch. (See WIPER AND WASHER SWITCH REMOVAL/INSTALLATION .)
  7. Disconnect the connectors.
    G16377070Courtesy of MAZDA MOTORS CORP.
  8. Remove the screws.
    G16377071Courtesy of MAZDA MOTORS CORP.
  9. While pull out the combination light in the direction of arrow (1) shown in the figure below.
    G16377072Courtesy of MAZDA MOTORS CORP.
  10. Remove the light switch.
  11. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals