LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> 3 Carbon Turbo, 4D Hatchback >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> On-Board Diagnostic - Restraints (4 Of 4) >> DTC U2100-00: Configuration Not Set >> Details On DTCs

Details On DTCs

U2100-00: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Configuration not set
Detection condition Determination conditions
WARNING:
  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure.
  • The SAS control module configuration setting is not performed.
  • The SAS control module configuration setting has not been done correctly.
Preconditions
  • Not applicable
Determination period
  • Not applicable
Fail-safe
  • Not applicable
Vehicle status when DTCs are output
  • Not applicable
Possible cause
  • The SAS control module stores DTCs other than U2100-00:
  • The SAS control module configuration setting is not implemented or the SAS control module configuration setting is invalid.
  • SAS control module malfunction
scientia non olet · About LEMON Manuals