Details On DTCs
U0155-02: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Communication error with instrument cluster |
| Detection condition |
Determination conditions |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure.
- The SAS control module detects a communication error with the instrument cluster.
|
| Preconditions |
|
| Determination period |
|
| Fail-safe |
|
| Vehicle status when DTCs are output |
|
| Possible cause |
- The body control module (BCM) stores DTCs.
- Malfunction in wiring harness (including connector/terminal) between instrument cluster and body control module (BCM)
- Malfunction in wiring harness (including connector/terminal) between body control module (BCM) and SAS control module
- Instrument cluster malfunction
- SAS control module malfunction
|