Details On DTCs

C0062-29: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Malfunction in low-G sensor (longitudinal-G) circuit in SAS control module
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. Malfunction in the sensor in the SAS control module.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	SAS control module malfunction