Details On DTCs

B1D75-62: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Open circuit in PAD switch circuit or short to ground
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. PAD switch malfunction. Malfunction in wiring harness between PAD switch and SAS control module.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	PAD switch connector malfunction Malfunction in wiring harness (including connector/terminal) between PAD switch and SAS control module PAD switch malfunction SAS control module malfunction