Details On DTCs

B1A55-00: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module collision detection signal output (collision detection signal output)
Detection condition	Determination conditions	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. The SAS control module outputs a collision detection signal.
	Preconditions	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	DTCs are stored in the SAS control module. (Vehicle collision or SAS control module operation (deployment)) SAS control module malfunction (SAS control module collision detection signal output)