Details On DTCs

B1492-00: (SAS) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module fuel cut signal output
Detection condition	Determination condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure. The SAS control module outputs a fuel cut signal.
	Precondition	Not applicable
	Determination period	Not applicable
Fail-safe	Not applicable
Vehicle status when DTCs are output	Not applicable
Possible cause	DTCs are stored in the SAS control module. (Vehicle collision or SAS control module operation (deployment)) SAS control module malfunction (SAS control module fuel cut signal output)